Documentation
Step 1: Ensure you have the following prerequisites:
- An iPad or iPhone with at least iOS 9.3
- Login credentials for your calendar account:
- If using the display for a conference room, use the room account or an account subscribed to the room account. For details, check the FAQ for your calendar system.
- If you have a calendar release without direct access data, ad hoc bookings under o365 are not possible.
- If you have a write-authorized user for Google Calendar, this user can use the app to its full extent.
- An internet connection and the conference room app
- Option to try unlimited (with interaction limitations) or choose your monthly package
Step 2: Next steps:
- Connect your calendar account to the iOS system (connect to the calendar via Exchange / o365 / Google)
- Secure your iPad (turn off Push Notifications and secure iPad from unwanted interactions)
- Set up the conference room app according to your needs (e.g., colors, wallpapers, fonts, booking times, appointment details, etc.)
- Start using the app
Step 3: Securing the device:
- Secure it with a wall mount. Some models lock the buttons, ensuring the device is used only as a calendar display.
- If you run an MDM system, set up Single App mode for enhanced security.
- Without MDM, consider using Guided Access.
Overview: The Conference Room Booking Display app supports all calendar services that can be integrated with Apple's iOS system. This includes, but is not limited to:
- Google Mail
- Microsoft Exchange 2007 / 2010 / 2013 / 2016
- Microsoft Office 365
- iCloud
- Yahoo
- AOL
- Outlook.com
Each calendar system has its own special features. For example, Microsoft Exchange / Office 365 offers a push service that updates calendar entries very quickly. In contrast, Google Mail does not support push on iOS; instead, events are fetched approximately every 15 minutes.
Note: The above list is informative. Please verify with your local setup to ensure the app functions as expected.
Step 1: Ensure you meet the following requirements:
- iPad or iPhone
- A dedicated user account in your G-Suite (referred to as "conferenceadmin")
- "conferenceadmin" subscribes to all necessary calendars
- Stable internet connection
Step 2: Configuration on the Google side:
- Go to calendar.google.com and log in with the "conferenceadmin" account.
- On the left side, subscribe to all the conference room calendars that you want to display on different iPads.
- Visit calendar.google.com/calendar/iphoneselect to select which subscribed calendars should be exported to the iPad. Save the changes.
Step 3: Configuration on the iPad/iPhone:
- Go to: Settings -> Accounts -> Add Account -> Google -> Enter the "conferenceadmin" email and password.
- Ensure only the calendar sync is enabled; other options can remain disabled.
- Go to: Settings -> Calendar -> Sync and set it to "Events 2 weeks back" and one day ahead. This may vary based on iOS versions.
- Disable "Show Declined Events".
Note: Google Calendar does not support push notifications on an iPad. Instead, events are fetched approximately every 15 minutes.
Step 1: Ensure you meet the following basic requirements:
- iPad or iPhone
- Conference room login credentials
- Internet connection
Step 2: Configure your iPad/iPhone to connect to the Exchange Server:
- Navigate to:
Settings -> Accounts -> Add Account -> Exchange - Enter the room credentials.
- If the connection is successful, it will be confirmed by checkmarks.
- Ensure only the calendar is synchronized; other options are not needed.
Step 3: Verify calendar synchronization:
- Open the Apple iOS Calendar app.
- Confirm that the calendar populates with appointments from the room.
Step 4: Adjust calendar sync settings:
- Navigate to:
Settings -> Calendar -> Sync - Set the value to the lowest option, such as "Events 2 Weeks Ago" and one day into the future. Note: Depending on the calendar system and iOS version, there may be variations in the setting options.
- Set "Show Invitee Declines" to off.
It's Your Data: Unlike other apps that store your sensitive conference room appointment data on external servers or in the cloud, our approach is different. All information is transferred exclusively between your iPad and your corporate calendar. Your data belongs solely to you. Our app does not require any additional servers to store data from your calendar system.
How It Works: Apple connects the iOS Calendar System with your Calendar Server, and our app presents this information in an aesthetically pleasing manner. This means that our app does not store any of your data elsewhere. Transparency is important to us; therefore, we assure you that the only internet queries made are to verify your license status.
App and Server Interaction:
- Synchronization: Your Apple iPad syncs with your Calendar Server. This connection is entirely under your control, and calendar data is transferred solely between the Calendar Server and your Apple device. Security is managed by Apple and your server.
- App Access: The Conference App requests calendar access because it cannot function without calendar data. The app acts like an Apple iCal Calendar HUD, overlaying the calendar and adding programmed logic. The app is designed so that you can only create or cancel self-initiated AdHoc bookings; all other appointments cannot be accessed or changed. For AdHoc bookings, the Conference App writes a new item to your connected calendar. You can choose the title and configure other settings.
- License Verification: If you're using a company license model, our license server verifies proper app license usage. In this case, the app connects to our server and sends the following data:
- License key
- identifierForVendor
- Name identifying the device (only for support)
Overview: To maintain a seamless experience with the Conference Room Booking Display app, it's advisable to disable push notifications that could cause interruptions. There are two primary methods to achieve this:
Method 1: Disable Notifications for Individual Apps
- Open the Settings app on your iPad.
- Tap on Notifications.
- You'll see a list of apps under "Notification Style." Select each app you wish to modify.
- For each app, toggle off the option Allow Notifications. This will prevent the app from sending any notifications.
Note: Repeat these steps for each app from which you wish to disable notifications. This method allows for granular control over which apps can send notifications.
Method 2: Enable "Do Not Disturb" Mode
- Access the Control Center by swiping down from the top-right corner of the screen.
- Tap the crescent moon icon to activate Do Not Disturb mode. This will silence all notifications temporarily.
Note: While "Do Not Disturb" is enabled, calls and alerts that arrive will be silenced, and a moon icon will appear in the status bar. You can customize "Do Not Disturb" settings by navigating to Settings > Do Not Disturb, where you can schedule times and allow calls from specific contacts.
Overview: Guided Access helps you limit your device to a single app and control which features are available. This is particularly useful for ensuring the Conference Room Booking Display app remains active without interference.
Step 1: Enable Guided Access:
- Open the Settings app on your iPad.
- Tap on Accessibility.
- Scroll down and select Guided Access.
- Toggle the switch to On.
Step 2: Set a Passcode:
- Within the Guided Access settings, tap on Passcode Settings.
- Select Set Guided Access Passcode.
- Enter a passcode that will be used to end Guided Access sessions.
Step 3: Start a Guided Access Session:
- Launch the Conference Room Booking Display app.
- Triple-click the Home button (or the Side button on devices without a Home button).
- Adjust any settings for the session if necessary.
- Tap Start to begin Guided Access.
Overview: By default, Office 365 resource mailboxes, such as room mailboxes, are not configured for direct access. To enable direct access, administrative modifications are necessary. The following instructions are based on Microsoft's documentation.
Overview: The app allows individual labels to display color gradients. Colors are based on the Hex System. Use the code without the preceding "#". For example:
EBCB55-B3352Fresults in a gradient from yellow (left) to orange (right).FFFFFF-0E2F44results in a gradient from white (left) to petrol blue (right).
To learn more about color gradients and to find the color you're looking for, please visit this website.
Overview: The app allows individual labels to display transparency by extending the standard hexadecimal color codes with an alpha component. This alpha component determines the opacity level of the color.
Hexadecimal Color Codes with Transparency: A standard hexadecimal color code is in the format #RRGGBB. To add transparency, append two additional hexadecimal digits (AA) to represent the alpha channel, resulting in #RRGGBBAA. The alpha value ranges from 00 (fully transparent) to FF (fully opaque). Below is a reference table for common opacity levels:
| Opacity (%) | Alpha Value (Hex) |
|---|---|
| 100 | FF |
| 95 | F2 |
| 90 | E6 |
| 85 | D9 |
| 80 | CC |
| 75 | BF |
| 70 | B3 |
| 65 | A6 |
| 60 | 99 |
| 55 | 8C |
| 50 | 80 |
| 45 | 73 |
| 40 | 66 |
| 35 | 59 |
| 30 | 4D |
| 25 | 40 |
| 20 | 33 |
| 15 | 26 |
| 10 | 1A |
| 5 | 0D |
| 0 | 00 |
Examples:
#FF0000E6results in a red color with 90% opacity.#FF00FF80results in a pink color with 50% opacity.
Overview: The app offers the capability to start an HTTP server, allowing external monitoring tools to query device status and app information.
Step 1: Activate the Internal HTTP Server
- Navigate to
Menu » General » Internal HTTP Serverwithin the app. - Toggle the Internal HTTP Server setting to "On".
- Specify a port number for the server to listen on (e.g., 8080).
Step 2: Determine the iPad's IP Address
- Open the
Settingsapp on the iPad. - Tap on
Wi-Fiand ensure you're connected to the desired network. - Tap the information icon (ℹ️) next to the connected Wi-Fi network.
- Note the IP Address listed (e.g., 192.168.1.10).
Step 3: Access the Monitoring Information
- Ensure both the computer and the iPad are connected to the same wireless network.
- On the computer, open a web browser.
- Enter the iPad's IP address followed by the specified port in the address bar, formatted as
http://[iPad_IP_Address]:[Port](e.g.,http://192.168.1.10:8080). - Press Enter to access the monitoring information.
Returned Values: Accessing the URL will return the following parameters:
deviceTimestamp: Current date and time on the device.appVersion: Version of the app installed.batteryLevel: Current battery percentage.batteryStatus: Indicates if the device is charging or unplugged.calendar: Name of the calendar currently in use.
Example response:
deviceTimestamp=2019-08-14-22-52-50, appVersion=1.1, batteryLevel=18, batteryStatus=unplugged, calendar='Calendar'
Monitoring Applications: The returned values can be utilized by monitoring systems to trigger automated alerts for critical conditions, such as low battery levels or when the power cable is disconnected.
Issue: In some cases, the iOS calendar may not display the appointment title, showing the organizer's name instead. This issue is due to a misconfiguration in the Exchange Server environment.
Solution: Your administrator needs to make specific configurations to resolve this issue. Please refer to Microsoft's documentation for detailed guidance. It is recommended to test these configurations on test systems first. Note: We do not take responsibility for your systems or the following fixes.
For detailed instructions, please consult Microsoft's official documentation: Microsoft Docs
Overview: To utilize the Adhoc booking feature, the following prerequisites must be met:
- Write Authorization: Ensure you have write permissions for the calendar. To verify, connect the calendar account to your iOS device and attempt to create an appointment using the "+" in the calendar. If you lack the necessary permissions, an error message will appear.
- Enable Adhoc Booking Feature: Activate the Adhoc booking feature within the app. Navigate to the app's menu, scroll to "Ad Hoc Booking," and toggle the feature on. Subsequently, configure the subordinate settings as needed.